Hydraulic oil filter is used in the hydraulic transmission system software to filter solid particles and transparent liquid compounds in operating chemicals, and hydraulic oil manufacturers think it can be大量Control air pollution levels of chemical substances in operation, maintenance of machinery and equipment正常Coefficient operation, plus the service life of the machine equipment。

        How often do you replace the hydraulic oil filter？Under normal circumstances, the replacement cycle of the oil removal filter is per operation2000 hours to replace, the four-column hydraulic press pump oil filter replacement cycle is初次作业250-hour replacement, and every 500 hours thereafter。If it is an iron plant, the operation situation is compared with the geographical environment差Replacing the filter element too much will often harm the production and processing, it is recommended to obtain the oil template on time to check the cleanliness level of the liquid, and then establish a comparison稳定Replacement cycle of。When replacing the hydraulic oil filter, check whether the bottom of the filter is composed of fine particles or slag of metal composite materials. If there is copper or iron pin, it indicates that the hydraulic pump, oil motor or valve may be damaged or will be damaged. If there is rubber material, it indicates that the hydraulic cylinder seal is damaged。excavatorHydraulic oilHow often should the filter element be changed？We suggest that excavator diesel engine car oil, filter element inReplacement once every 250 hours, gas filter every 50 hours清理(Purge) once。发现正常Coefficient filter element(small filter) When there is dust, just要The gas filter element has been replaced, but the working environment is harsh and should be reduced清理And replacement time。Diesel filter depending on the quality of the diesel engine is not the same, easily master the replacement time, often sewage treatment coarse filter sludge and water, generally inReplace every 500 hours。Machine oilThe application cycle is long, and the color is observed是否Normal, the higher the temperature, the more re-applied, the hydraulic oil filter element inComb once every 250 hours。

        The leading role of the hydraulic oil filter is to enter the compressed air with oil content generated by the network server into the FRP cooling tower and extract it into the industrial equipment自然The air filter element is filtered to obstruct and gather the organic waste gas in the gas, causing the liquid to concentrate at the bottom of the filter element and return to the intake port of the refrigeration unit through the oil pipeline, so that the refrigeration unit can discharge more simple and high-quality compressed air。